Western Telematic PollCat III Betriebsanweisung PDF herunterladen (Seite 135)

11-1

11. The 80% Full Alarm

The 80% Full Alarm is designed to notify the user when internal memory

is nearly full. When memory becomes 80% full, NetLink II can send an

SNMP Trap, call a modem or pager, send email notiﬁcation or contact the

user via the Console Port.

To conﬁgure the alarm, go to the Main Menu. Type 25 and press [Enter]

to access the Alarm Conﬁguration menu. When the menu appears, type

and press [Enter]. The 80% Full Alarm Conﬁguration Menu (Figure 11.1)

offers the following options:

Alarm:

1. 80% Full Alarm: Enables/disables the 80% Full Alarm. In order to

function, the alarm must be enabled.

Alarm Action Parameters:

21. Action: Determines how NetLink II will react when an 80% Full

Alarm is generated. The options are None, Callout, Alphanumeric

Page, Numeric Page, SNMP Trap, Email / Text Message, or Console

action. For more information, please refer to Section 12.

22. Phone Number: The number dialed for a callout or page.

Note: For Numeric Paging, this prompt can specify both a phone

number and numeric "message". In this case, the number is entered

as follows:

PHONENO@MESSAGENO#

Where PHONENO is the pager number, and MESSAGENO is any

number that notiﬁes the user that an alarm has occurred. For

example, to dial 555-1212 and send the message "999", item 3

would be deﬁned as "

5551212@999#".

23. Pager ID 1: The ﬁrst Pager ID Number dialed for an Alphanumeric

Page action. NetLink II can dial up to three pagers for this alarm.

24. Pager ID 2: The second Pager ID Number for the 80% Full Alarm.

25. Pager ID 3: The third Pager ID Number for the 80% Full Alarm.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 237 238

Keine Kommentare

Western Telematic PollCat III Betriebsanweisung Seite 135