Western Telematic PollCat III Installationsanleitung PDF herunterladen (Seite 64)

R AF F I C

N AL Y S T

N S T A L L A T I O N

U I D E

A N U A R Y

20 11 I

M P AC T

E C H N O L O GI E S

N C

O N FI D E N T I A L A N D

R O P R I E TA R Y

Once you have finished configuring the Poll-Safe, you now need to connect it to your

switch. The Input port is Configured as DTE port, most PBX ports are configured as

DCE therefore most likely required configuration is a just a straight through cable. If the

PBX port is also DTE you will need a NULL modem adapter also.

Connect the serial cable to the Poll-Safe Input port. When this connection is properly

made, the RXD IN LED should turn GREEN. If the RXD IN LED is RED then

something is not correct and you should try a different cable. If it is neither RED nor

GREEN, then insert the null modem adapter between the Poll-Safe and the cable from the

PBX or you can change the jumpers to the Poll-Safe to be DCE. You will need to

reference your user’s manual for information.

The RDX IN LED will be GREEN and will flicker RED when data is being transmitted

from the PBX.

Since the Poll-Safe PS680 can understand PollCat commands Traffic Analyst will use

those commands for the Poll-Safe. The Poll-Safe PS635 does not understand the PollCat

command so the Poll-Safe commands are used to access the data and clear the buffer

after data collection has occurred.

3.2.3. Scannex

Traffic Analyst can poll data from the Scannex once an hour (or more frequently if

needed).

When you set up Traffic Analyst for use with the Scannex, you will need to enter a user

name and password that the Scannex will recognize. You will also need to enter the

filename of the file Traffic Analyst will retrieve. Consult your Scannex documentation

for this information.

There is a utility available from the Scannex website, SE Discoverer, that you can use to

help you with the Scannex set up. As of this writing, the URL for downloading this

Scannex utility is as follows:

SE Discover program - http://www.scannex.com/tools/setup_sediscover.exe

Please note that this URL can change at any time, so you may have to go to scannex.com

to search for it.

You can also download the IP User Manual at:

http://www.scannex.com/docs/ipbuffer_manual_20080502.pdf

Again, this URL is subject to change.

3.2.3.1. Setting up the Scannex ip.buffer

Assuming you are connecting it to the LAN (with a direct connect serial cable to the

PBX), connect the ip.buffer to your LAN (and the serial cable to the PBX) and connect to

power outlet.

1. Open up SE Discover program.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 72 73

Kommentare zu diesen Handbüchern

Keine Kommentare

Western Telematic PollCat III Installationsanleitung Seite 64

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone Western Telematic PollCat III